粘合促进剂 / Adhesive Accelerator

Blast accelerators are designed for use with Apollo cyanoacrylates, and can be pre-applied or post-applied during assembly to increase the cure rates and gap filling capabilities of the adhesive. The Blast line of products are a just a few of the many tools that Cyberbond offers in order to provide you with the right adhesive solution.

CB01
CB02
CB06
CB03
CB07
CB04
Blast 6001

BLAST 6001 speeds the curing of Apollo cyanoacrylates where low humidity levels or surface acidity may exist. This product is also used for fillet conditions or when gap filling between substrates. BLAST 6001 can be pre-applied to the opposite surface from the adhesive or post applied to the adhesive joint by brush, pump sprayer, or dropper.

  • Accelerator for use with Apollo cyanoacrylate adhesives
  • Heptane based Speeds the cure of Apollo cyanoacrylates
  • Assists in gap-filling and fillet applications
  • Can be pre- or post-applied
Technical Data Sheet
Safety Data Sheet

Blast 6001 H

BLAST 6001H is an enhanced version of BLAST 6001 and speeds the curing of Apollo cyanoacrylates where low humidity levels or surface acidity may exist. This product is also used for fillet conditions or when gap filling between substrates. BLAST 6001H can be pre-applied to the opposite surface from the adhesive or post applied to the adhesive joint by brush, pump sprayer, or dropper.

  • Accelerator for use with Apollo cyanoacrylate adhesives
  • Heptane based Speeds the cure of Apollo cyanoacrylates
  • Enhanced version of BLAST 6001 for even faster curing
  • Assists in gap-filling and fillet applications
  • Can be pre- or post-applied
Technical Data Sheet
Safety Data Sheet

Blast 6002

BLAST 6002 speeds the curing of Apollo cyanoacrylates where low humidity levels or surface acidity may exist. This product is also used for fillet conditions or when gap filling between substrates. BLAST 6002 can be pre-applied to the opposite surface from the adhesive or post applied to the adhesive joint by brush, pump sprayer, or dropper.

  • Accelerator for use with Apollo cyanoacrylate adhesives
  • Isopropyl based
  • Speeds the cure of Apollo cyanoacrylates
  • Assists in gap-filling and fillet applications
  • Can be pre- or post-applied
Technical Data Sheet
Safety Data Sheet

Blast 6003

BLAST 6003 speeds the curing of Apollo cyanoacrylates where low humidity levels or surface acidity may exist. This product is also used for fillet conditions or when gap filling between substrates. BLAST 6003 can be pre-applied to the opposite surface from the adhesive or post applied to the adhesive joint by brush, pump sprayer, or dropper.

  • Accelerator for use with Apollo cyanoacrylate adhesives
  • Acetone based
  • Speeds the cure of Apollo cyanoacrylates
  • Assists in gap-filling and fillet applications
  • Can be pre- or post-applied
Technical Data Sheet
Safety Data Sheet

中文|English